top of page
PortaMill® PM14
Convertissez vos billes en bois d’œuvre précieux avec votre scie à chaîne*, une échelle et la PortaMill de Norwood.
 
C’est la scierie idéale si:

 

  • vos besoins de coupage sont occasionnels

  • vous devez couper dans des endroits éloignés

  • vous devez utiliser votre auto, VTT, bateau ou avion pour déplacer votre scierie mobile

  • votre espace d’entreposage est limité

 
Avec votre PortaMill, votre scie à chaîne* comme tête de coupe et votre échelle à extension comme rail, vous pouvez

 

  • scier des billes de bois franc ou conifère jusqu’à 35 cm (14 po) de diamètre.*

  • couper des poutres carrées et des planches jusqu’à 20 cm (8 po) de largeur… soit des  2 x 4, 4 x 4, 2 x 6, 6 x 6 …


Voici comment:

 

1. Serrez votre bille en place: Utilisez les supports de billes et les griffes de serrage réglables.

 

2. Choisissez votre profondeur de coupe: Tournez la poignée de la manivelle pour lever ou abaisser doucement la scie à chaîne.

 

3. Effectuez votre coupe: Actionnez la manette des gaz posée sur la poignée et avancez la scie sur le rail.


Vous avez probablement une scie à chaîne et une échelle dans votre garage aujourd’hui. Quels projets pourriez-vous entreprendre si vous aviez votre propre scierie?

 

Demandez nos conditions spéciales pour l'achat de vôtre machine comme partenaire du programme!

Convert your logs into valuable lumber with your chainsaw*, a ladder and the Norwood PortaMill.  It’s the perfect sawmill if –

  • Your sawmilling needs are occasional.

  • You need to mill in very remote locations.

  • You need to move your sawmill by ATV, small car, boat or airplane.

  • You have limited storage space.

With the PortaMill, use your chainsaw* as the sawhead and your household extension ladder as the track.

  • Mill hardwood and softwood logs up to 14” (35cm) in diameter.*

  • Cut square beams and dimensional lumber up to 8” wide … 2 x 4’s, 4 x 4’s, 2 x 6’s, 6 x 6’s …

Here’s how –

1. Clamp your log in place: Use the log rests and adjustable log dogs.

2. Choose your cutting depth: Turn the crank handle to smoothly raise and lower the chainsaw.

3. Make your cut: Engage the handle-mounted throttle and advance the saw along the track.

You probably already have a chainsaw and ladder in your garage right now. What projects could you do if you had your own sawmill?

 

Truly portable, the PortaMill is entirely quick-connect/quick-disconnect and takes just minutes to set up. Components are easy to carry, easy to transport and easy to store.

 

You probably already have chainsaw and ladder in your garage right now.  What projects could you do if you had your own sawmill?

 

FEATURES

 

Adjustable Platform -
The PortaMill's patented platform includes an adjustable outrigger arm to accommodate extension ladders of different widths. Comes complete with track sweepers and quick-connect/quick-disconnect 2-way adjustable, carriage-retaining balance-wheel assemblies. 

Smooth-Acting Sawhead -
Smoothly and accurately raise and lower the sawhead (and horizontally-mounted chainsaw) by turning the crank conveniently located at the top of the vertical guide bar - Clockwise for up and counter-clockwise for down.

Precise Depth-of-Cut -
Accurately set your depth-of-cut using the professional "quarter scale" supplied with your PortaMill®. Scaled at 2" and 1" with a 5/16th kerf already calculated in, there is also a "user scale" so that you can mill your own custom thickness. Engaging the depth-of-cut locking handle locks the height of the sawhead for precise, accurate cuts.

Solid Dogging -
The Norwood® PortaMill® comes standard with two log dog/log rest assemblies for fast dogging and positive locking. Also features "back" dogs for fast dogging of squared beams, cants and boards.

Comfort -
The PortaMill® features an adjustable push handle that you can set to suit your height. The handle-mounted throttle control allows you to comfortably activate the chainsaw throttle while guiding the saw through the cut. The push handle also features soft grips.


QUALITY-BUILT 

 

Like all Norwood portable sawmills, the PortaMill is quality-built in the U.S.A. and Canada by highly-trained, highly-skilled operators with leading-edge fabrication and machining technologies. 

 

And, like all equipment bearing the Norwood name, this sawmill is protected by industrial-grade powder-coat – electrostatically-applied thermoset polymer cured under heat to create a hard finish much tougher than conventional paint.

 

 

Photos of the PortaMill in this listing show the optional Auxiliary Chain & Bar Oiler (not included) – Your chainsaw only delivers oil to the top of the bar where it is easily thrown off at the nose, especially when the saw is mounted sideways for milling. The auxiliary oiler kit reduces friction and heat of the chain by up to 50%. It delivers oil to the sprocket of your sawbar. The oiler kit includes a bottle, bottle basket, oil line with valve and copper nozzle. Add the optional auxiliary chain & bar oiler kit for only USD $89.00 more (Item No. PM02) (shipping and taxes extra).

 

The sawmill in this listing is a brand-new Norwood PortaMill.  It does not include the chainsaw, ladder or optional auxiliary oiler kit.   


* The PortaMill adapts to many chainsaw makes and models.

● For small to mid-sized logs (below 10 inches (25cm) in diameter), chainsaws of 50cc or greater, equipped with ripping chain, are usually sufficient. 
● For mid-sized to larger logs (10 - 14 inches (25cm - 35cm) in diameter), chainsaws of 65cc or greater, equipped with ripping chain, are recommended.

 

Ask for our special condition and partnerships to buy your own sawmill!

bottom of page